Patio furniture slipcovers are an easy and inexpensive way to modernize older furniture and update the look of your room. Save money when redecorating by covering existing furniture. Calculate your cover yardage and shop fabric discounts, Closeouts and sales. Coverings can also be made from old drapes. Look for strong fabrics that will stay well and materials that you can throw in your laundry to easily remove stains and dirt.
12 Picture Gallery: Steps to Make Patio Furniture Slipcovers
Wash and iron the fabric. If the patio furniture slipcovers used to be drapes, rip the seams with a splitter and the iron fabric flat. If the fabric has a pattern or design, you must place the pattern carefully so that it matches up the seams when you do the cover. Hang the fabric down, over the majority of the chair or sofa first. Usually, this will be from the place where the backrest and seat cushion join, over the top of the seat backrest and down to the floor. Leave 3 inches of extra fabric on the floor at the bottom.
Allow extra fabric at the seam to deeply insert the pads if you make a piece of lid. One-piece patio furniture slipcovers goes over the entire piece of furniture, pillows and everything, and is the easiest cover to do. Hang second most next. This is usually from the back of the seat cushions forward and down the front to the floor. Leave 3 inches of extra fabric on the floor at the bottom. Let the same extra fabric measurement you used for the first part at the seam for the cut into one piece lid. Pin the seam using a half-inch seam allowance.
This post topic: Slipcovers