Wool rug is a good choice for high traffic areas, such as the entrances, as it is very durable and resistant to excess moisture present in these areas of the house. Install a wool rug the same way you install another type of carpet. Special carpet installation tools, such as a knee adjuster and lever extruder, are available for rent in rental centers. Thoroughly clean, sweep and vacuum the floor in the area where the wool carpet will be installed. Measure the room from the motherboard of the motherboard.
Install the rivet-free strips by nailing the 1/4 to 1/2 inch floor of the motherboard all the way around the room. But do not install them in the portals. Position strips without rivets so the pins are pointing towards the walls. Install the carpet padding. Stretch the filling and cut a little smaller than the dimensions of the room. The filler edges should sit just before the strips without rivets. Trim to fit if necessary.
24 Picture Gallery: Ideas to Install Wool Rug
If you must piece two pieces of joint filler, butt the edges and do not overlap them. Join the edges with strong adhesive tape. Cut the woolen rug a few inches larger than the dimensions of the room. Lay the wool rug, with the ends overlapping the edges of the room. If you have to join two pieces of siding together, put a piece of sticky side carpet tape-stitching it on the floor in the place of sewing.
This post topic: Rug